How To Choose Your Perfect Blade

in order to choose a good blade, three things are to be observed: first, that the blade have no flaw in it, especially across, it being more dangerous so than length-way. secondly, that it be well tempered, which you'll know by bending it against a wall or other place; if it bend only towards the point, 'tis faulty, but if it bend in a semicircular manner, and the blade spring back to its straightness, 'tis a good sign; if it remains bent it is a fault, though not so great as if it did not bend at all; for a blade that bends being of a soft temper, seldom breaks; but a stiff one being hard tempered is easily broke. the third observation is to be made by breaking the point, and if the

It would not be amiss for a man to see his sword mounted, because the cutlers, to save themselves the trouble of filing the inside of the hilts and pommel, to make the holes wider, often file the tongue of the blade too much, and fill up the vacancies with bits of wood, by which means the sword is not firm in the hand, and the tongue being thin and weak, is apt to break in parrying or on a dry beat, as has been unhappily experienced. care should also be taken that the end of the tongue be well riveted to the extremity of the pommel, lest the grip should fly off, which would be of very dangerous consequence.
About the Author

Matthew Anderson runs an online news magazine on wrought iron and ironwork http://www.wrought-iron-guide.com. Find further readings on railings, fencing or outdoor wrought furniture at Matthews ironwork guide http://www.wrought-iron-guide.com/category/ironwork/